Limited-time offer: sign up now to get 100 points and 10 free calculation runs

Sign up
Back to Help Center

AI Product Entry: Review Units and Constraints Before Loading

Create product specifications from text with AI, check unit conversions and handling settings, then add quantities and calculate a container load.

AI product entry5 minutesLoadVis

Use AI to structure product specifications

AI Create turns a block of product text into reusable product records. Open Product Management, choose AI Create from the AI menu and paste the product name, outside dimensions and gross weight for each item. Separate products clearly and state the units. Recognize and Create saves records that pass the product checks, so review the saved entries before using them in a plan.

For example, “Sample motor, 120 × 80 × 90 cm, gross weight 120 kg” supplies the core specification fields. This is fictional input for explaining the workflow, not a customer case or a measured AI result.

Normalize units, then check the output

The product recognizer is instructed to convert mm and m into cm, and tonnes into kg. It does not simply copy every number without conversion. The conversion instructions help with mixed source units, but a language model can still misread a label or confuse unit and total weights. Check the actual saved fields against the source document.

A 600 × 400 × 500 mm package should become 60 × 40 × 50 cm. A unit gross weight of 0.035 t should become 35 kg. Never use the text parser to invent missing dimensions, packaging strength or load-bearing ratings. If required fields cannot be determined, supply them before trying again.

Review the handling constraints that matter to your shipment

Review allowed orientations, pallet requirements, packaging condition, stacking layers and load-bearing settings. A recognized dimension does not establish a package’s compression strength. Confirm these details from packaging specifications and the people who will handle the cargo.

A hypothetical error illustrates the distinction: if a package must remain upright but the saved orientation allows another position, the loading calculation is working from the wrong constraint. Correct that setting before calculating. This example is not a report of a customer incident or a claim about a particular utilization percentage.

Add quantities and calculate a loading plan

Product Management stores specifications for reuse. Add the reviewed products to a loading plan and confirm shipment quantities, equipment dimensions, payload and loading rules there. The loading engine computes placements from the supplied data; the AI text parser does not perform a physical inspection.

Inspect loaded and remaining quantities and the visual output before sharing guidance. Confirm the real equipment, packaging, access and securing requirements with the responsible team. A layout or high utilization alone does not verify transport readiness.

Choose text or Excel for your source data

Use AI Create for short specification text and AI Excel import for .xlsx or .xls workbooks in the workspace. Valid workbook rows can be saved even when other rows fail; correct and retry only the failed rows to avoid duplicate successful entries.

To try shipment recognition without an account, open the free calculator. It supports up to two products, one container and 2,000 cartons, with limited daily AI attempts. Its quick upright-carton estimate does not check door clearance, load securing, crush strength, weight distribution or loading order. Read the AI feature guide for the full input limits and the AI data-processing notice before submitting your list.